Common Applications
- Die-cut insulation parts
- Flexible circuit protection
- Heat-resistant protective films
- Custom laminated components
Industrial tape solution
Polyimide Laminated Tape for Die-cut Insulation Parts
Polyimide laminated tape materials for die-cut insulation parts, heat-resistant protective films, flexible circuit protection and custom converted components.
Specifications
Standard construction below, with the values confirmed for this range. Custom widths, lengths and die-cut forms are produced to requirement.
CarrierPolyimide film with laminated layers
AdhesiveSilicone adhesive, liner or added film layers selectable
Available formsRoll, slit roll, sheet or die-cut part with release liner
Heat resistance200°C / 30 min NRAL
| Model | Total thickness | Adhesion | Tensile strength | Elongation |
|---|---|---|---|---|
| HXD-P-R1 | 0.135 +/- 0.005 mm | 5 +/- 1 N/25mm | ≥70 N/25mm | ≥30% |
| HXD-P-R2 | 0.155 +/- 0.003 mm | 6 +/- 1 N/25mm | ≥110 N/25mm | ≥90% |
Liner: 0.075 mm fluorinated release PET liner Heat resistance: 200°C / 30 min NRAL Release force: ≤100 g/25mm
Other widths, lengths and die-cut forms are produced to requirement. Send your application, working temperature and drawing or roll size for a specific recommendation.
Custom Options
- Laminated film structures
- Custom adhesive and liner
- Slitting and sheet conversion
- Custom die-cut parts
Buyer Checklist
- Base film and laminate structure
- Adhesive and liner compatibility
- Required thickness and tolerance
- Roll, sheet or die-cut format
Need jumbo rolls, log rolls, slit rolls or die-cut parts?
Send your application, required thickness, roll width or drawing, liner preference and operating temperature. We can review the construction and arrange a sample for evaluation.
Related laminated and die-cut materials
