Common Applications
- High-temperature die-cut bonding
- Electronics assembly
- Insulation component fixing
- Heat-resistant mounting
Industrial tape solution
Polyimide Double-sided Tape for High-temperature Bonding
Polyimide double-sided tape for high-temperature bonding, electronics assembly, insulation components, die-cut fixing parts and heat-resistant converted structures.
Specifications
Standard construction below, with the values confirmed for this range. Custom widths, lengths and die-cut forms are produced to requirement.
CarrierPolyimide film carrier
AdhesiveDouble-sided silicone adhesive
Available formsRolls, custom widths and die-cut shapes
Heat resistance200°C / 30 min NRAL
| Property | Value |
|---|---|
| Product No. | HXD-D1, HXD-D2, HXD-D3 |
| Total thickness | 0.10 +/- 0.01 mm, 0.15 +/- 0.01 mm or 0.20 +/- 0.01 mm, depending on model |
| Tape adhesion | 7 +/- 1 N/25mm |
| Tensile strength | ≥115 N/25mm |
| Elongation | ≥50% |
| Heat resistance | 200°C / 30 min NRAL |
Other widths, lengths and die-cut forms are produced to requirement. Send your application, working temperature and drawing or roll size for a specific recommendation.
Custom Options
- Custom adhesive options
- Release liner selection
- Slit rolls and sheets
- Custom die-cut shapes
Buyer Checklist
- Operating temperature
- Adhesive type and holding power
- Carrier and liner thickness
- Bonding surface and dwell time
Need jumbo rolls, log rolls, slit rolls or die-cut parts?
Send your application, required thickness, roll width or drawing, liner preference and operating temperature. We can review the construction and arrange a sample for evaluation.
Related double-sided tapes
