Common Applications
- Die-cut protective films
- Electronic spacers and pads
- Component protection
- Custom converted parts
Industrial tape solution
Polyester Laminated Tape for Die-cut Protective Films
Polyester laminated tape materials for die-cut protective films, spacers, electronic pads, linered structures and custom converted industrial parts.
Specifications
Standard construction below, with the values confirmed for this range. Custom widths, lengths and die-cut forms are produced to requirement.
CarrierPolyester film with laminated layers
AdhesiveSilicone adhesive, liner and color selectable
Available formsRoll, slit roll, sheet or die-cut part with release liner
Heat resistance200°C / 30 min NRAL
| Model | Total thickness | Release liner | Adhesion | Tensile strength | Elongation |
|---|---|---|---|---|---|
| HXD-P-L1 | 0.130 +/- 0.005 mm | 0.05 mm fluorinated release PET liner | 8.5 +/- 1 N/25mm | ≥110 N/25mm | ≥90% |
| HXD-P-L2 | 0.158 +/- 0.003 mm | 0.075 mm fluorinated release PET liner | 8.5 +/- 1 N/25mm | ≥110 N/25mm | ≥90% |
Heat resistance: 200°C / 30 min NRAL Release force: ≤100 g/25mm
Other widths, lengths and die-cut forms are produced to requirement. Send your application, working temperature and drawing or roll size for a specific recommendation.
Custom Options
- PET film lamination
- Custom colors and liners
- Slitting and sheeting
- Die-cut conversion
Buyer Checklist
- Film thickness and layer structure
- Adhesive and liner choice
- Dimensional tolerance
- Required roll or sheet format
Need jumbo rolls, log rolls, slit rolls or die-cut parts?
Send your application, required thickness, roll width or drawing, liner preference and operating temperature. We can review the construction and arrange a sample for evaluation.
Related laminated and die-cut materials
